[SLL] using /dev/cciss/ ?

[Matt Fisher]

You need the HP Array Configuration Utility CLI: hpacucli

You can get it here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swIte
m=MTX-8d3c35f1321042e69094ef3dd3&lang=en&cc=us&idx=1&mode=4

Matt

 

> -----Original Message-----
> From: linux-list-bounces at lists2.linuxjournal.com 
> [mailto:linux-list-bounces at lists2.linuxjournal.com] On Behalf 
> Of Jeremy C. Reed
> Sent: Tuesday, March 11, 2008 7:26 PM
> To: linux-list at ssc.com
> Subject: [SLL] using /dev/cciss/ ?
> 
> 
> My system currently has:
> 
> # df -m / /boot
> Filesystem           1M-blocks      Used Available Use% Mounted on
> /dev/cciss/c0d0p3        65697      9291     53016  15% /
> /dev/cciss/c0d0p1           99        11        84  11% /boot
> 
> # swapon -s
> Filename                                Type            Size  
>   Used    Priority
> /dev/cciss/c0d0p2                       partition       
> 2096472 0       -1
> 
> And dmesg includes:
> 
> HP CISS Driver (v 3.6.14-RH1)
> ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 185
> cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 130 using DAC
>       blocks= 143305920 block_size= 512
>       heads= 255, sectors= 32, cylinders= 17562
> 
>       blocks= 143305920 block_size= 512
>       heads= 255, sectors= 32, cylinders= 17562
> 
>  cciss/c0d0: p1 p2 p3
> 
> 
> I have been told the system has 4 x 72gb disks creating two 
> volumes. It is a HP SmartArray p400i controller.
> 
> What tools would I use to find out if another volume can be 
> added? And create?
> 
> Any pointers would be appreciated.
> 
> 
> 
> 
>   Jeremy C. Reed
>